How to Plan and Install Garden Irrigation System

A garden can be a great way to save money by growing your own food, but only if you avoid wasting water and energy. As anybody who has tried their hand at irrigation design knows, it can be hard to choose the right irrigation supplies and layout to make a good system. There are a lot of different options out there, but if you follow a few simple steps, suggested by our friend at The Irrigation Shop, an irrigation equipment supplier with 20 years of experience in the industry, you can be sure to end up choosing the right one.

Step 1: Know Your Needs

You should decide what you want to grow before you settle on an irrigation system. Once you have chosen your plants, figure out how much space and water they need to grow. Plan your garden layout. Once you have that information, you can use it to figure out what sort of system you need.

Step 2: Make a Plan

Plan everything out carefully before you buy or install any components. Be sure to double-check all of your ideas. It's easy to fix a problem in the planning stage, but very hard to fix a problem once machines have been installed. It's often a good idea to get professional advice at this stage, especially for people who have little or no experience working with irrigation systems.

The easiest way to get that advice is to talk to a company that specializes in providing irrigation supplies, such as Hunter Irrigation. Your best bet may be to just use a Hunter irrigation controller and whatever specific parts meet your needs, but you might also need something more unusual. Either way, a professional can help make sure that you don't make any mistakes that you will live to regret.

Step 3: Buy the Parts

Make sure that you know exactly what you need before you start shopping, and avoid buying anything that was not on your list. As long as you did your homework and planned your system out in advance, you won't need to make any changes here. If you have any ideas about changes at this stage, make sure that you look back at your plan and see how those changes would impact the whole system before you add them.

Look for quality when you choose your parts. Purchasing from a specialized company is often ideal because it can hard to detect flawed pieces before they are installed. The best defense against defective components is to purchase from a reputable company, like Hunter Irrigation.

Step 4: Put It Together

This is one of the hardest part for inexperienced gardeners. Take your time when you do the assembly, and be sure to look up any processes that you don't understand. Quality work is important. If you don't feel comfortable doing the work yourself, you should hire a professional who knows how to install irrigation system to perform the installation to make sure that you don't run into any problems.

Step 5: Keep an Eye On It

Your job isn't over once the system is installed. Pay close attention to it for the first few weeks so you can detect problems early and fix them fast. After a little while, you'll be sure that your system is working properly and you can finally relax.