What are the Most Common Reasons for Drain Blockage

/image:drainratz.co.za/

 

Blocked drains are one of the most common problems faced by people in a bathroom or kitchen. Most of the times, this problem can be taken care of by the people living in the house and you do not have to call a plumber or a drainage consultant. However, there are other times when the problem is worse and you have to consult a plumber. In such situations, you may have to spend some extra money which could have been avoided if you would have taken necessary precautions. The fact is that you can only take precautions if you know the cause of the problem. Therefore, in this article, we will tell you about some main reasons for drain blockages in your home.

The Most Common Reasons for Drain Blockage

1) Debris - The most basic reasons for a blocked drain is debris or foreign objects which are stuck in drain pipes or other pipes which are underneath. These may be pieces of food, soaps, hair etc. In the beginning, these materials do not block the drain. They only cause a major problem once these things begin to collect over a period of time. Therefore, you can easily take care of such problems if you recognize them in time. Just take out the pieces of soap, food or hair to unblock drains. You can also cover the mouth of the drain with a net so that nothing except water goes through.

2) Rains - Heavy rains may also cause problems for outside drains. Downpours, storms or heavy rains may block the drain pipes with leaves, dirt, mud etc. Drains in your home are usually designed to handle a limited amount of water flow from your kitchen or bathroom. They are not designed for heavy rains and therefore, blockage is common during heavy rains or storms. Heavy rains cause severe blockages and you should immediately call a drainage consultant. Such blockages may even flood your property.

3) Cracks or broken pipes - When there are cracks in a drain pipe, water does not flow freely. Therefore, there may be blockages. There is also a chance that the pipe might eventually break and block the flow of water. Pipes may crack or break because of poor installation. Therefore, it is necessary that you hire a good company while installing drainage pipes. A skilled drainage consultant would make sure that the pipes last longer. The same happens if pipes have been installed incorrectly. Due to incorrect joints, water flow may be blocked and this may result in blockage. Hiring a good consultant is a must to ensure that there are no errors during installation.

4) Water flow - As strange as it may sound, even the flow of water can cause blockage in drain pipes. If the flow of water is inadequate because of different factors like a broken net, incorrect fixtures etc. there may be severe blockages. However, you should always consult a good plumber or a drainage consultant to unblock drains, if you feel the problem may get worse.

A Horse-Drawn Buggy

 Last week we spent a few days holiday at a hotel -out of town. One morning, when I was walking around in the front of the hotel, I saw a horse-drawn buggy nearing.

The Weekend in Black and White

Tips to Keep Your Swimming Pool Clean and Hygienic

Having a swimming pool in your backyard always brings the sense of luxury and excitement. It not only makes the home look more lavish, but also become the big time source of relaxation for the inmates of the house. There is nothing better than plunging into the pool on a fresh Sunday morning and relaxing under the bright sunny natural light.

Perhaps luxury comes with a cost, followed by lots of responsibilities. Those who own personal outdoor swimming pools know it well. Building a pool is undoubtedly expensive, but maintaining it is even more costly and requires lots of efforts and time as well. In this article, we will tell you about some basic things that you should take into consideration while taking care of your pool. These tips will help you keep the water of the pool hygienic and crystal clear.

Tips To Maintain a Swimming Pool

1. Circulation Is The Key-  It is very important to check that the main pump of the pool is in proper working condition. This pump is the heart of the pool that makes the process of circulation possible. Without water circulation it will be difficult to maintain the purity and clarity of water, and as soon as the winters will arrive the algae will start settling into the pool. Thus, make sure that the pool’s main pump in working in order.

2. Run The Filter-  Filtration is as important as circulation. The process of filtration removes all kind of impurities and dirt from the pool. Without a sufficient and effective filter the water inside the pool will remain dirty. Therefore, it is important to conduct a routine check-up to ensure the filter is working properly. The filter-run time may vary on the basis of size of the pool and climatic conditions. Make sure that the run time is adequate for the season and the climate. If you are not sure of the run time, it is always advised to call the pool facility experts to get better guidance.

3. Balanced Water - It is also important to balance the water chemistry of the pool. All you need is some guidance and a good test kit to ensure that water level and chemicals present in it are perfectly balanced. Having a balanced pool water can help you save on a lot on other expenses, that may arise due to various pool problems caused because of chemical imbalances. If you do not know how to do it, consider hiring a professional pool facility for it.

4. Clean the Pool Regularly- Since it is a regular practice, many people take it as a tedious work. However, if done with proper concentration it should not take more than 10-15 minutes of your time each week. You can also get an automatic outdoor swimming pools cleaner installed to save yourself some more time. Make sure you empty the skimmer basket, pump basket and cleaner bags before moving out of your house every day. This help prevents the clogs which can be the major cause of obstructed water circulation.

Buying Vintage Furniture : Things to Keep in Mind

A good furniture has the ability to enhance the entire look of a place. The material, style, color, polish and design, everything play an important role in determining the atmosphere and ambiance of a place. Every detail of a furniture affects the total appearance and appeal of a room. In the era of modern and modular furniture, Antique furniture pieces are still in huge demand. This is for a simple reason that they provide a sense of class and uniqueness.

Vintage industrial furniture is the new demand of ever changing market. People find it elegant, classy and appealing in every respect. You can bring a rich and glamorous feel in your living space or in your office with antique furniture pieces. However, finding an appealing vintage furniture is not an easy task. It should be purchased only on the basis of appeal and overall elegance. There are many other factors that you should consider when making the purchase.

Considerations to Keep in Mind While Buying Vintage Furniture

  

1.    Appearance and Condition:  As the name suggests, Vintage is basically antique pieces that were built years ago and are now available in limited quantity. You might get too excited while seeing an antique furniture piece and may even get carried away with this feeling. The only advice would be not to get fooled with the looks and appearance of the furniture item. It may seem classy and elegant from outside, and have broken corners and chipped pieces within. Make sure you check the quality and overall condition of the furniture piece before buying. It should not have any chipped corners and must not be suffering from woodworms.

2.    Durability: If it is vintage, it is ought to be durable! Many people have this notion when buying an antique piece. This is only half correct, for a reason that not every person selling the furniture is concerned about the maintenance. Vintage furniture pieces need lots of maintenance and care. Vintage durable is usually made of solid wood, which only needs refinishing to cover up the signs of wear and tear. Furnishing can be quite expensive and will affect the entire the appearance of the furniture itself. As far as material is concerned,  it is advisable to choose furniture which is made of solid material.

3.   Functionality: This should be the major consideration while buying a vintage industrial furniture. You must find a furniture piece that will provide you with maximum benefit and utility. If you're spending huge amount on its purchase and maintenance, then make sure it retains its function. Otherwise, no matter how good the furniture looks in your home or office, it is of no use if it cannot provide any comfort. 

4.    Price: If you are lucky enough you may bag a good deal and get a vintage furniture at half the price as well. However, in normal circumstances where everything goes well, buying a vintage furniture can even cost you a fortune. Just make sure that whatever you may purchase should be worth each penny you have spent on it.